MFL65 metal bellow seal 1MFL65 metal bellow seal 1
MFL65 metal bellow seal 2MFL65 metal bellow seal 2
MFL65 metal bellow seal 3MFL65 metal bellow seal 3

Eagle Burgmann type MFL65 metal bellow seal replacement

  • Stationary bellow type, high sliding velocities, high temperature
Facebook
Twitter
LinkedIn

Description:

The MFL65 mechanical seal was designed for high sliding velocities and high temperature scope. No elastomer secondary seals is applicable for this seal.The stationary seat type according to the specific requirements and conditions of working.

Operating Limits:

  • Temperature:-20-400℃
  • Speed: 50m/s
  • Pressure: 25bar
  • Standard size: 19mm–100mm

Materials:

  • Seal ring: Car,Sic,Ssic,TC
  • Secondary seal: FFKM, flexible graphite
  • Metal bellow :304,316,HAST.C, Inconel alloy
MFL65 metal bellow seal drawing
MFL65 metal bellow seal size table
MFL65 metal bellow seal 3
MFL65 metal bellow seal 2

Some others you may like

Fit Checks Beyond the Model Name

A stationary bellows layout is only one part of a successful replacement. For your MFL65 enquiry, compare the shaft diameter, working length, seat dimensions and drive arrangement with the drawing on this page. These details help establish whether the proposed seal fits the available chamber.

Review Temperature, Pressure and Speed Together

The MFL65 range is intended for demanding temperature and sliding-speed conditions. Use the published limits as a starting point, then review the actual operating combination, including start-up and shutdown. A listed maximum for one parameter should not be treated as approval to run every parameter at its maximum simultaneously.

Material Choices Guided by the Process Fluid

Selection involves more than the bellows alloy. Consider the seal faces and secondary sealing material alongside the fluid composition, temperature and any suspended particles. The material options listed above provide a basis for discussing a configuration suited to the application rather than choosing by model number alone.

Clear Details for Replacement Enquiries

Send the existing seal drawing or measured dimensions, pump model, process fluid and normal operating conditions. Photos of the removed assembly and its mounting position can clarify the seat and drive details. This gives the replacement discussion a practical starting point and helps identify information still needed before ordering.

Production Process

Saw Stainess
Machining
Machining
CNC Machine Center Milling and Drill
CNC Machine Center Milling and Drill
Check and Measuring
Check and Measuring

Production Line

Equipment

FAQ